Thickness range from 1.2 to 25 mm
Architectural Glass · 01
Tempered Glass for Architectural Projects
Drawing-based tempered glass production for façades, doors, windows, balustrades, canopies and partitions.
Product Overview
Capabilities Confirmed for Project Review
WJ supplies tempered glass for building applications in thicknesses from 1.2 to 25 mm. Glass below 4 mm is handled through chemical tempering according to the supplied capability information.
Clear, ultra-clear, Low-E and coated glass options can be processed, with project shapes and fabrication completed from customer drawings before tempering.
Maximum confirmed size of 10 m × 3.3 m
Clear, ultra-clear, Low-E and coated glass options
Shaped glass processing supported
Heat Soak Test available
Production from CAD, DXF or customer drawings
Available Configurations
Specified Tempered Glass Options
The options below are limited to the configurations confirmed in the supplied production capability information.
01Clear tempered glass
02Ultra-clear tempered glass
03Low-E tempered glass
04Coated tempered glass
05Shaped tempered glass
06Chemically tempered glass below 4 mm
Technical Capabilities
Confirmed Production Parameters
Final suitability is reviewed against the full glass make-up, drawing and project specification.
ParameterConfirmed Capability
Thickness Range1.2–25 mm; glass below 4 mm uses chemical tempering
Maximum Size10 m × 3.3 m
Minimum Size300 × 300 mm
Glass OptionsClear, ultra-clear, Low-E and coated glass
Processing OptionsEdge grinding, chamfering, drilling, slots, notches and shaped processing
Available ConfigurationsFlat and shaped tempered glass; chemical tempering for glass below 4 mm
Minimum Hole Diameter5 mm
Hole-to-Edge RequirementConfirmed according to glass thickness
Heat Soak TestAvailable
Flatness ControlControlled to the stated Chinese national standard level
Production Capacity50,000 m² per month
Typical Lead Time15–30 days
Custom Processing
Confirmed Processing Options
Processing is confirmed against the selected glass type, dimensions and final make-up.
01Edge grinding
02Chamfering
03Drilling
04Slots
05Notches
06Shaped processing
07Heat Soak Test
Applications
Project Uses Confirmed in the Capability Sheet
Only the applications expressly confirmed in the supplied product information are listed.
Façades
Doors & Windows
Balustrades
Canopies
Partitions
Project Customization
Produce from Your Drawings
Tempered glass can be produced from CAD files, DXF files or customer drawings. Hole positions, edge distances and processing details are reviewed against the glass thickness before confirmation.
Recommended enquiry inputs
01CAD or DXF file
02Glass dimensions and thickness
03Edge, hole, slot and notch details
Standards & Certifications
Available Documentation
- Product test reports are available.
- A CCC test report is available.
Documentation is matched to the selected product configuration and should be confirmed before order placement.
Tempered Glass RFQ
Send us your glass specifications or project drawings for quotation.
Include the glass make-up, dimensions, quantity, processing details, required documentation and delivery destination.